| SI.NO | BRIEF OF JOB DESCRIPTION | DESIRED CANDIDATE PROFILE | POSITION CODE | NO OF POSITIONS | REQUEST RAISED ON DATE | STATUS | COMMENTS |
|---|---|---|---|---|---|---|---|
| 1 | Good understanding in aerodynamics and Behavior of aircraft structure in response to static and dynamic loads. * Knowledge on Aerospace standards, Strength of Materials, Composites. * 2D and 3D Meshing, Hand calculations, Linear static analysis, Normal mode, Non-Linear, Buckling, Slosh, Ballistic impact * Msc-Nastran, Patran, Hypermesh, Abacus. * Good communication skills, Ability to handle tasks with minimal guidance. | 7+ years of relevant experience to be available in order to guide with activities. (Qualification : BE/B.Tech/ M.E/M.Tech (Engg) in Aeronautical/Mechanical engineering/ Unmanned systems) | Team Lead Job Code :TLNP | Open(Interview is going on | Send resume to hr@baehal.com | ||
| 2 | * Good understanding in aerodynamics and Behavior of aircraft structure in response to static and dynamic loads. * Knowledge on Aerospace standards, Strength of Materials, Composites. * 2D and 3D Meshing, Hand calculations, Linear static analysis, Normal mode, Non-Linear, Buckling. * Msc-Nastran, Patran, Hypermesh, Abacus. | 3+ years of relevant experience in structural analysis. (Qualification : BE/B.Tech/ M.E/M.Tech (Engg) in Aeronautical/Mechanical engineering/ Unmanned systems) | Engineer Job code :ENP | Open(Interview is going on | Send resume to hr@baehal.com | ||
| 3 | 1. Single point of contact deputed at customer site on full time basis to associate with customer for effective planning and execution of project. 2. Preparation of project plan for the team and obtain due approvals from customer 3. Effective coordination among the team members for effective project execution by assigning the tasks to team members as per the plan 4. Participate in the design and development and testing of the project/systems and participate in review of the deliverable and oversee the process compliance for predictability of the time lines and quality of deliverables 5. Tracking of project progress and reporting the same to the customer and HBU /management on periodical basis | 1. The Project Manager shall haveB.E./B.Tech./M.E./M.Tech. in Computer Science/Information Technology/ Electronics/ Electronics & Communication/ Electronics & Instrumentation/ Electrical Engineering from a recognized university with minimum first class and shall have minimum 10 years of experience in Avionics Software Development and /or Simulator Software Activities with customer handling experience. 2. Project Manager shall have good knowledge on the AS 9100 and ISO 9001 and CMMI Level 3 processes as applicable for SDLC 3. Project Manager should work as per working days (06 days per week), shift timing's and holidays of the client calendar at client place . 4. The engineers deputed should work additional hours on normal days and holidays during exigency of work (if required or necessary due to exigency of work). 5. The engineers shall follow all applicable security regulations of the client at site during the performance of his/ her duties | Project Manager Job Code :PM(SIM) | Open(Interview is going on | Send resume to hr@baehal.com | ||
| 4 | 1. To perform design and coding of software at customer site on full time basis for effective execution of project 2. Preparation of requirement documents as per the customer requirements 3. Preparation of design documents as per the customer requirements 4. Review of requirement documents as per customer requirements 5. Review of design documents as per customer requirements 6. Perform coding of software as per the requirement and design documents 7. Review of coding of software as per the requirement and design documents 8. Report to project manager at site on the status of tasks assigned and completion | 1) B.E./B.Tech./M.E./M.Tech. in Computer Science/Information Technology/ Electronics/ Electronics & Communication/ Electronics & Instrumentation/ Electrical Engineering from a recognized university. 2) Should have GATE score of 60 % or more as desirable criteria.(Optional ) 3) Engineers shall have minimum 70 % aggregate or equivalent CGPA in BE/ME/MTech and shall have experience in Avionics or Simulator software development activities from reputed MNCs in India or overseas or Aerospace /Avionics companies in India. 4) Engineers shall have good knowledge on the Avionics /Simulator Software Developmental Life Cycle Activities (SDLC) 5) Engineers should have at least 3 years of previous experience in the field of Software development activities 6) Engineers shall have Minimum 2 year of experience in software development using the programming languages C/C++/ C# 7) Engineers shall have Minimum 1 year experience in handling requirement & design tools like or similar to Rational Rhapsody/Rose, Rational clear case/Quest.(Optional) 8) Engineers shall have Minimum 2 year experience in embedded software development on Operating systems like Vxworks /Integrity (Optional) 9) Engineers should work as per working days (06 days per week), shift timing's and holidays of the client calendar at client place . 10) The engineers deputed should work additional hours on normal days and holidays during exigency of work (if required or necessary due to exigency of work). 11) The engineers shall follow all applicable security regulations of the client at site during the performance of his/ her duties. | Software Engineer (Software design & coding) Job Code: SDC | Open(Interview is going on | Send resume to hr@baehal.com | ||
| 5 | 1) To perform design and coding of software at customer site on full time basis for effective execution of project 2) Preparation of requirement documents as per the customer requirements 3) Preparation of design documents as per the customer requirements 4) Review of requirement documents as per customer requirements 5) Review of design documents as per customer requirements 6) Perform coding of software as per the requirement and design documents 7) Review of coding of software as per the requirement and design documents 8) Report to project manager at site on the status of tasks assigned and completion | i. B.E./B.Tech./M.E./M.Tech. in Computer Science/Information Technology/ Electronics/ Electronics & Communication/ Electronics & Instrumentation/ Electrical Engineering from a recognized university. ii. Should have GATE score of 60 % or more as desirable criteria.(Optional ) iii. Engineers shall have minimum 70 % aggregate or equivalent CGPA in BE/ME/MTech and shall have experience in Avionics or Simulator software development activities from reputed MNCs in India or overseas or Aerospace /Avionics companies in India. iv. Engineers shall have Minimum 2 year of experience in software development using the programming languages C/C++/ C#/Java/Dot net framework v. Engineers should have at least 3 years of previous experience in the field of Graphics applications development activities vi. Engineers should work as per working days (06 days per week), shift timing's and holidays of the client calendar at client place . vii. The engineers deputed should work additional hours on normal days and holidays during exigency of work (if required or necessary due to exigency of work). viii. The engineers shall follow all applicable security regulations of the client at site during the performance of his/ her duties | Software Engineer (Graphics application development) Job Code :GAD | Open(Interview is going on | Send resume to hr@baehal.com | ||
| 6 | Software Testing and Integration 1.0 Deputed at customer site on full time basis to perform software testing at customer site on full time basis for effective execution of project 2.0 Preparation of test plan documents as per the requirements 3.0 Preparation of test cases documents as per the requirements 4.0 Review of test cases and results documents as per requirements 5.0 Review of test plan documents as per requirements 6.0 Perform testing of software as per the requirement and plan documents 7.0 Review of test cases and test results of software as per the requirement 8.0 Report to project manager at site on the status of tasks assigned and completion of the same | I. B.E./B.Tech./M.E./M.Tech. in Computer Science/Information Technology/ Electronics/ Electronics & Communication/ Electronics & Instrumentation/ Electrical Engineering from a recognized university. II. Should have GATE score of 60 % or more as desirable criteria.(Optional ) III. Engineers shall have minimum 70 % aggregate or equivalent CGPA in BE/ME/MTech and shall have experience in Avionics or Simulator software development activities from reputed MNCs in India or overseas or Aerospace /Avionics companies in India. IV. Engineers shall have good knowledge on the Avionics /Simulator Software Test Life Cycle Activities V. Engineers shall have Minimum 2 year experience in Unit Level testing and software integration testing and hardware integration testing of Software Code C/C++ (LDRA test bench-Preferably) VI. Engineers should have at least 3 years of previous experience in the field of Software Testing activities VII. Engineers should work as per working days (06 days per week), shift timing's and holidays of the client calendar at client place . VIII. The engineers deputed should work additional hours on normal days and holidays during exigency of work (if required or necessary due to exigency of work). IX. The engineers shall follow all applicable security regulations of the client at site during the performance of his/ her duties. | Software Test Engineer Job Code : STI | Open(Interview is going on | Send resume to hr@baehal.com |
